3/4" NPT Male x 3/4" Hose Barb – 90° Elbow – Banjo

A Banjo glass-reinforced polypropylene 90° hose barb elbow with a 3/4" NPT male thread and a 3/4" barb. It turns the hose through a right angle at the fitting, so the hose runs flat along a skid or tank without kinking.

Specifications / Features:

• Brand: Banjo
• Part Number: HB075-90
• Thread: 3/4" NPT Male
• Hose Barb: 3/4" (19 mm), for 3/4" inside diameter hose
• Bore: 12.7 mm
• Material: Glass-reinforced polypropylene, Schedule 80
• Chemical Resistance: Bleach proof at softwash strengths of sodium hypochlorite
• Maximum Pressure: 300 PSI
• Maximum Temperature: 65°C

Benefits:

• Turns the hose 90° at the fitting, with no kinked hose
• Keeps plumbing tight against a tank, pump or skid frame
• Heavy duty Schedule 80 body, with no metal in the flow path
• Secure the hose with a hose clamp

Thread note: Banjo threads are NPT, not BSP. Check what you are screwing into before you order. Fitting tip: Banjo recommends a paste thread sealant, not thread tape, which can split the female thread. Tighten by hand, then a further half to three-quarter turn.