Push-Fit Fittings
Push-Fit Reducing Straight Joiner 12mm x 6mm
SKU PGJ12-6
$4.95incl. GST
In stock · ready to ship
Plug-in reducer. The 12 mm stem pushes into any 12 mm push-fit socket and gives you a 6 mm socket. It converts an existing fitting and does not join two tubes on its own.
Key features
- Steps a larger line down to a smaller one without tools
- Plastic body
How to fit
- Cut the tube square with a tube cutter and check the end is clean and unmarked
- Push the tube in past the first resistance until it stops, then pull back to check it has gripped
- To remove, turn the water off, hold the release collar in and pull the tube out
- A drip when the water goes on usually means the tube is not fully home
Good to know
- For cold water. Drain the line in freezing weather
- Keep grit off the tube end, as it damages the seal inside the fitting
- Maximum working pressure 150 psi (10 bar)