2.5" x 10" Filter Housing - Clear - 3/4" Ports

Clear 10" filter housing with 3/4" ports, for standard 2.5" x 10" cartridges. Use it ahead of an RO membrane to hold a sediment or carbon pre-filter. The clear bowl lets you see the state of the cartridge without opening it.

Key features

• Takes standard 2.5" x 10" cartridges: sediment, GAC or carbon block
• 3/4" BSP female ports with brass thread inserts
• Clear bowl, so you can see when a sediment cartridge is loading up
• Pressure-relief button on the cap
• Spanner and mounting bracket included

How to use

• Turn the water off and press the relief button before unscrewing the bowl
• Keep the O-ring clean and lightly greased, and do not overtighten the bowl
• Run sediment first, then carbon, then the RO membrane

Good to know

• Cold water only
• Keep it out of direct sunlight and do not let it freeze
• Maximum pressure 150 psi