2.5" x 20" Filter Housing - Clear - 3/4"

Clear 20" filter housing with 3/4" ports, for standard 2.5" x 20" cartridges. It holds twice the filter length of a 10" housing, which means longer between changes and more carbon contact time at the same flow. It suits higher-output and twin-membrane systems.

Key features

• Takes standard 2.5" x 20" cartridges
• 3/4" BSP female ports
• Clear bowl, so you can see when a sediment cartridge is loading up
• Pressure-relief button on the cap
• Spanner and mounting bracket included

How to use

• Turn the water off and press the relief button before unscrewing the bowl
• Keep the O-ring clean and lightly greased, and do not overtighten the bowl
• Leave room underneath to drop the bowl when you change the cartridge

Good to know

• Cold water only
• Keep it out of direct sunlight and do not let it freeze
• Maximum pressure 150 psi